Technology in continuous improvement
Our team of designers is constantly working to create products closer to the market needs, in order to offer increasingly high performances, reliable and cost-effective technical solutions for every type of application and job site.
The results of this effort are our new Promove job tools: the CP600 and XP60.
The CP600 is the new Multi-processor designed for cutting concrete pillars, separating reinforcement iron from concrete or even cutting metal structures such as greenhouses, sheds and metal profiles.
A tool designed to achieve the highest standards of versatility and efficiency in his range.
The CP series multi-processing crushers are extremely adaptable thanks to the three different types of jaws and the capacity to be equipped on machines from 2 to 55 tons, as well as on machines of upper weight category in a high-reach application.
primary breaking of reinforced concrete
Like the other multi-processors in CP series, the CP600 is also equipped with a high-performance cylinder that guarantees a great demolition and cutting power and it features a protection valve against pressure peaks and overflows, with a structure that allows a 360° rotation of the jaws.
The section spreaders on the perforating teeth allow a more effective crushing. The blades are completely reversible and they can be used 4 times with great reduction of costs.
CP600 technical features
Crusher weight: 620 kg
Excavator weight: 6-11 t
Cylinder force: 34 t
Cylinders working pressure: 300bar
Cylinders oil flow: 60/120 l/min
Rotation engine pressure: 100bar
Rotation oil flow (min/max): 10-12 l/min
Jaws max opening: 580 mm
Total height: 1670 mm
The XP60 is an extremely innovative hydraulic breaker, even in its constitutive technology: the secret to contain so much power in such a tiny and light body is the internal monoblock structure without tie rods.
Powerful and light
Promove has designed the 60 kg breaker for the lightest range of mini excavators on the market. The machine works with an working pressure between 100 and 110 bar and a flow rate between 10 and 15 l / min. It’s equipped with 1/2" lubricant inlet and outlet bushings, with a maximum back counter-pressure of 25 bar.
Thanks to the unique mix of power, lightness and reliability, the XP60 is the perfect solution for a wide range of applications, with low cost of maintenance but always at the highest performance.
XP60 technical features
Monoblock Hammer – No Rods
Excavator Weight (min/max t): 0,6-1,6
Working Pressure (bar): 100/110
Number of blows per minute (1/min): 633/950
Energy class per blow (joule): 174